Course Descriptions

Course Type:
IPC 7711/7721 Certified IPC Specialist (CIS) Rework/Repair and Modification Recertification Program
The CIS class is modularized to allow you to choose only the classes your company needs. This is a hands-on course. Module one is mandatory and consists of Common procedures. Modules 2-9 consist of; wire splicing procedures, through hole component removal and installation, chip and MELF rework procedures, rework of SOIC/SOT components, J-lead and QFP rework, printed wiring board circuit and laminate repair, conformal coating removal.
IPC 7711/7721 Certified IPC Trainer (CIT) Certification Program
This class provides skill-based training regarding rework, repair and modification procedures as covered in the IPC-7711 and IPC-7721 documents. CIT's are qualified to teach Certified IPC Applicaiton Specialist (CIS) training and certification programs.
Shop Floor Series: Problem Solving
This one day class of the Shop Floor Series, will enable the students to learn and apply the basic techniques for problem solving. Course topics include: What is Problem Solving Application of Continuous Improvement Methodology: Plan-Do-Study-Act (PDSA) Do’s and Don’ts Problem Solving Tools Flow Charts Control Chart Check Sheet Histogram Pareto Diagram Cause and Effect Diagram Scatter Diagram Five Whys Exercise Supplier-Input-Process-Output-Customer (SIPOC) Problem Solving Strategies Process Failure Modes Effects Analysis (PFMEA) tool and exercise Six Steps to Problem Solving Critical Thinking Creative Thinking Decision-making Process Types of Decisions Structured Unstructured Challenges to Decision-making
IPC-A-600 Certified IPC Specialist (CIS) Training Program (Nights & Weekends)
THIS IS A NIGHTS & WEEKENDS CLASS.  Monday - Thursday, 5:30pm - 8:30pm.  Saturday 8:30am - 4:30pm. This class is provided during the evenings and weekends for prospective students that are unable to attend the normally scheduled classes due to employment or personal issues. Please contact customer service for details. Call: 800-858-0604 or email: sales@stielectronicsinc.com. The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. This program includes the Introduction and modules 1 through 9. Upon completion of this class, students will be familiar with the IPC-A-610 acceptability criteria for all three classes of products and be able to apply this criterion to internal quality functions.
IPC/WHMA-A-620B Certified IPC Trainer (CIT) Recertification Program (Nights & Weekends)
THIS IS A NIGHTS & WEEKENDS CLASS.  Monday - Thursday, 5:30pm - 8:30pm.  Saturday 8:30am - 4:30pm. This class is provided during the evenings and weekends for prospective students that are unable to attend the normally scheduled classes due to employment or personal issues. Please contact customer service for details. Call: 800-858-0604 or email: sales@stielectronicsinc.com. This is the 2 day recertification program for CITs. This training program provides a detailed review of the IPC/WHMA-A-620 Requirements and Acceptance for Cable and Harness Assemblies and concludes with a qualifying examination. CITs are qualified to teach Certified IPC Application Specialist (CIS) training.
IPC J-STD-001 Certified IPC Trainer (CIT) Recertification Program (Nights & Weekends)
THIS IS A NIGHTS & WEEKENDS CLASS.  Monday - Thursday, 5:30pm - 8:30pm.  Saturday 8:30am - 4:30pm. This class is provided during the evenings and weekends for prospective students that are unable to attend the normally scheduled classes due to employment or personal issues. Please contact customer service for details. Call: 800-858-0604 or email: sales@stielectronicsinc.com. CIT's are certified for 2 years and must attend a 16-hour recertification class to maintain their certification status. CIT's will have the opportunity to review the content of the standard in its current revision as well as discuss any clarification of intent resulting from Technical Committee activities. Testing and workmanship samples are required for successful recertification.
IPC-A-610 Certified IPC Trainer (CIT) Recertification Program (Nights & Weekends)
THIS IS A NIGHTS & WEEKENDS CLASS.  Monday - Thursday, 5:30pm - 8:30pm.  Saturday 8:30am - 4:30pm. This class is provided during the evenings and weekends for prospective students that are unable to attend the normally scheduled classes due to employment or personal issues. Please contact customer service for details. Call: 800-858-0604 or email: sales@stielectronicsinc.com. CIT's are certified for 24 months and must attend a 16-hour recertification class to maintain their certification status. CIT's will have the opportunity to review the content of the standard in its current revision as well as discuss any clarification of intent resulting from Technical Committee activities. Testing is required for successful recertification.
J-STD-001 Certified IPC Specialist (CIS) Certification (Nights & Weekends)
THIS IS A NIGHTS & WEEKENDS CLASS.  Monday - Thursday, 5:30pm - 8:30pm.  Saturday 8:30am - 4:30pm.This class is provided during the evenings and weekends for prospective students that are unable to attend the normally scheduled classes due to employment or personal issues. Please contact customer service for details. Call: 800-858-0604 or email: sales@stielectronicsinc.com. The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 emphasizes through-hole technology and Module 4 emphasizes surface mount technology. Module 5 focuses on inspection, inspection methodology, and process control. Modules 2-5 include a hands-on training exercise. Each module consists of 8 classroom hours.
J-STD-001 Certified IPC Trainer (CIT) Certification (Space Addendum Included)
This class provides skill-based training regarding soldering practices and processes as covered in the J-STD-001 and its companion documents. CITs are qualified to teach Certified IPC Application Specialist (CIS) training and certification programs. This course also provides the Space Addendum, addressing additional requirements that are required to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space.
J-STD-001 Certified IPC Specialist (CIS) Recertification Modules 1-6 (Space Addendum Included)
The CIS program is modularized to allow for maximum flexibility in meeting individuals training needs. Module 1 is an introduction to the process requirements of J-STD-001, Module 2 focuses on wires and terminals, Module 3 emphasizes through-hole technology and Module 4 emphasizes surface mount technology. Module 5 focuses on inspection, inspection methodology, and process control. Modules 2-5 include a hands-on training exercise. Module 6 focuses on the J-STD-001 Space Electronics Hardware Addendum. Module 6 consists of 4 classroom hours.
Page 1 of 512345

Training Course Links